Advertisement
• Upgrade: Copy the upgrade file to a USB memory device
and insert the USB device in to the meter's USB socket.
Select upgrade and press OK. Use the arrow keys to
navigate through the folders on the USB device to find
the upgrade file and press OK.
Warning: Please don't turn power off or disconnect the USB
device beforre the upgrade is complete as this can, damage
the meter's software, and prevent the meter booting up.
• Factory Setting: Press OK key, then press OK again to confirm Set Default.
NOTE: if you perform a factory reset, all the user settings and the database will be reset.
• System Info:In the system setting, press the INFO key to check the system version.
16
S601b - Upgrades & Factory Reset
Advertisement
