Advertisement
• Scan Sat
Press the Blue key to enter the Automatic SAT scan menu.
In Sat/Tp Manager press u key to enter the Tp list.
• Edit Tp: Press the Red key to edit TP .
NO.: TP number.
Frequency: Use the number keys to input a value.
Symbol Rate: Use the number keys to input a value.
Polarity: Press u key to change polarity.
• Del Tp: Press the Green key to delete TP , then press OK to
confirm or press MENU to cancel.
• Add Tp: Press the Orange key to add a TP.
Refer to TP edit instructions above.
• Scan Tp: Press the Blue key to enter the TP scan menu.
8.7.8 Compass
• Sat Longitude: Use the t u and pq keys to locate a
satellite and press OK.
• Location: If you select Manual, you will need to manually
input Longitude and Latitude using the number keys.
Alternatively you can use the pq keys to find a city location
press OK to confirm. The appropriate data will appear below.
• Calibration: Press the Red key then press OK, a message
will appear slowly rotate the meter until the message closes.
Your compass should now be calibrated.
8.8 System Setting
• Country Setting: Use the t u keys to change the country.
• OSD Language: Use the t u keys to change the
OSD language.
• TV Format: Use the t u keys to change the TV format.
• Video Output: Use the t u keys to change the video
output format.
• TV Resolution: Use the t u keys to change the TV resolution.
• Digital Audio Output: Use the t u keys to change the digital
audio output format.
• Time Zone: Use the t u keys to change the Time Zone.
• Channel Lock: Press the u key to switch the channel lock
ON/OFF.
• PWR Unit: Use the t u keys to select the units for PWR.
• Speaker: Press the u key to switch the speaker ON/OFF.
• Flashlight: Press the u key to switch Flashlight ON/OFF.
• 12V: Press the u key to switch DC 12V output ON/OFF.
• KB-BackLight: Use the t u keys to select the amount of time
the backlight stays on: 5/10/20 seconds.
• Set Location: Press the u key or OK to set Location,
Longitude or Latitude. Use the u and t u keys to select
Manual or a city. If you select Manual, you will need to
manually input Longitude and Latitude with the number keys.
S601b - Compass & System Setting
15
Advertisement
