Page 2
Components Upon unpacking your chair from it’s delivery box, you should have one single component (the body of the chair). Additional components are packed inside the body, you will learn how to access and utilise these components in the next steps. Chair body x 1 Unpacking Turn the chair body so that the underside is facing you.
Page 3
Starting with the front legs, insert a leg into the Step 1 corresponding slot. Fit a spring washer to a bolt followed by a washer and t it into one of the screw holes. Repeat for the second screw to t the leg into the frame of the chair.
Page 4
Place the chair on a at surface, then sit on the chair Step 3 and shift your weight around until the legs are level and the chair does not rock. en use the allen key to tighten all the bolts. F x 1 Turn the chair upside down one last time and pull Step 4...
Need help?
Do you have a question about the Bouverie Armchair and is the answer not in the manual?
Questions and answers