Table of Contents
Advertisement
Safety and Maintenance
Safety & Warning
•
Make sure all nuts, bolts, and screws are tightened prior to use.
•
Be sure that all adjustment locking devices and safety devices are properly engaged prior to use!
•
Never over-tighten the above-mentioned devices and parts to avoid damage to the unit.
•
Check for loose parts and components and make proper adjustments prior to use.
•
Check to see if there are any tears or bends in the welding or metal prior to use. If tears or bends are found,
DO NOT use the unit and contact our CUSTOMER SUPPORT.
•
Extreme care must be taken to not allow your feet, fingers, hair, clothing, and/or any loose items to be snagged into any portion of the bike when
the unit is in motion. Failure to follow these instructions could result in serious injury, including the loss of fingers.
•
Always wait for the pedals and other moving parts (which can gain great momentum during riding) to come to a
complete stop before dismounting the unit to avoid serious injury.
How To (Emergency) Stop
NOTE : Always wait for the pedals and/or any other moving parts (which can gain great momentum during riding) to come to a complete stop before
dismounting the unit to avoid serious injury.
To reduce speed on the bike, you may use the combinations of your feet on the Left/Right Pedals (#7L/R) and your hands on the Left/Right Handle-
•
bars (#4LA/#4RA) to gently and safely apply counter-momentum.
•
Wait for the pedals to come to a complete stop.
•
Now you may safely dismount the unit
How To Move/Transport The Bike For Storage
NOTE :
To safely move, transport, and/or store the unit, please seek the help of capable assistants (minimum of 2 people).
•
Position one person on each side of the bike (one on the left, and one on the right).
•
Have each person use the hand closest to the Seat (#9) to grip it. Then, grip the other hand from underneath the respective Handlebar (#4LA or
#4RA). (These are the safest areas to avoid injury during this process.)
•
Have both people simultaneously lift the unit to move/transport the unit to the desired area.
How To Adjust The Seat
•
Using one hand to hold Seat Tube (enhanced) (#5E), unscrew Knob (#17) using the other hand.
•
Slide and adjust Seat Tube (enhanced) (#5E) to the desired hole setting to your preferred height.
•
Holding Seat Tube (enhanced) (#5E) at this setting, re-insert/re-screw Knob (#17), ensuring it engages and
fully inserts through the holes of Main Frame (#1B) and Seat Tube (enhanced) (#5E). Please make sure to securely tighten Seat Tube (enhanced)
(#5E) but not over-tighten.
•
Before sitting on the cycle, press down firmly and pull up slightly on the seat to make sure it is engaged and secure.
Maintenance & Care
•
Please review all safety instructions and warnings in this entire Owner's Manual, as well as any safety/warning labels affixed to
the product before use.
•
Do not use solvent cleaners. If you are in any doubt, do not use your cleansing product; contact
CUSTOMER SUPPORT.
•
The specific parts on your unit which may see possible signs of wear after prolonged use are listed as follows
(please check these parts before each use):
Tension Control (#36); Left/Right Pedals (#7L/#7R); Left/Right Handlebars (#4LA/#4RA).
•
For any replacement warning labels, please contact our CUSTOMER SUPPORT at
1 (888) 266-6789 or 1 (909) 598-9876, or mail in a written request to:
Body Flex Sports Inc.
21717 Ferrero Parkway
Walnut, CA 91789
More detailed information about how to reach our CUSTOMER SUPPORT may be found on Page 2 of the
Owner's Manual under the "CUSTOMER SUPPORT" section.
QM894
Storage
Storage
Page
18
Advertisement
Table of Contents
