Lifemax QM894 Owner's Manual & Assembly Instructions page 13

Assembly STEP 4B
**LEFT Side:
Please ensure that the Left Handlebar (#4L) is assembled
to the outter edge (away from shroud) of the Left Linkage
(#6L).
The order of parts (from inner side to outter) should look
like the exploded diagram below in the following sequence:
Nylon Nut (#20) > Washer (#19) > Bushing (#34)
of Left Linkage (#6L) > Washer (#19) >
Left Handlebar (#4L) > Bolt (#18)
OUTTER (SIDE)
QM894
**LEFT Side:
INNER (SIDE)
4LA
*RIGHT Side:
Please ensure that the Right Handlebar (#4R) is
assembled to the outter edge (away from shroud) of
the Right Linkage (#6R).
The order of parts (from inner side to outter) should
look like the exploded diagram below in the following
sequence:
Nylon Nut (#20) > Washer (#19) > Bushing (#34)
of Right Linkage (#6R) > Washer (#19) > Right
Handlebar (#4R) > Bolt (#18)
*RIGHT Side:
INNER (SIDE)
4RA
OUTTER (SIDE)
Page 12