Table of Contents
Advertisement
Assembly STEP 3B
**LEFT Side:
FOR PROPER ASSEMBLY, please ensure that the Left
Linkage (#6L) is assembled to the outter edge (away from
shroud) of the Left Crank.
The order of parts (from inner side to outter) should look
like the exploded diagram below in the following sequence:
Left Nylon Nut (#23L) > Left Crank > Left Linkage (#6L)
> Big Washer(#21) > Bushing (#22) > Left Pedal (#7L)
OUTTER (SIDE)
L
Please Note :
LEFT SIDE: Please ensure that the notched side of Bushing (#22) is
facing Big Washer (#21) from the left side so that Bushing (#22) can be
inserted into Big Washer (#21) and the two pieces fit flushed together.
Please refer to the exploded diagram for correct orientation and
positioning.
22
QM894
**LEFT Side:
INNER (SIDE)
L
L
Left Crank
21
**RIGHT Side:
FOR PROPER ASSEMBLY, please ensure that the Right
Linkage (#6R) is assembled to the outter edge (away from
shroud) of the Right Crank.
The order of parts (from inner side to outter) should look like
the exploded diagram below in the following sequence:
Right Nylon Nut (#23R) > Right Crank > Right Linkage
(#6R) >Big Washer(#21) > Bushing (#22) > Right Pedal
(#7R)
*RIGHT Side:
INNER (SIDE)
Right Crank
Please Note :
RIGHT SIDE: Please ensure that the notched side of Bushing (#22)
is facing Big Washer (#21) from the right side so that Bushing (#22)
can be inserted into Big Washer (#21) and the two pieces fit
flushed together. Please refer to the exploded diagram for correct
orientation and positioning.
OUTTER (SIDE)
22
21
Page
10
Advertisement
Table of Contents
