Table of Contents
Advertisement
Computer Operation
Operation Procedures
FUNCTION
TIME
: Displays the total amount of time using the machine.
SPEED
: Displays current speed.
DISTANCE
: Displays the distance traveled.
CALORIES
: Displays the amount of calories burned.
ODOMETER
: Displays total accumulated distance. ODO will reset when MODE is pressed for 3 seconds or
when batteries are changed.
SCAN
: The monitor will then rotate displaying through the following functions: time,speed,distance,
calories and odometer. Each function will display for 4 seconds.
NOTE:
1. If the display is faint or shows no figures ,please replace the batteries.
2. The monitor will automatically shut off if there is no signal received after 4 minutes .
3. The monitor will auto-power on when exercise and/or motion input is detected.
4. The monitor will automatically start calculating when you start to exercise and will stop calculating when you stop
exercising for 4 seconds .
Specifications
AUTO SCAN
TIME
SPEED
CALORIES
DISTANCE
BATTERY TYPE
OPERATING TEMP
STORAGE TEMP
QM894
Every 4 seconds
00:00-99:59 min
0.0-99 mi/h
0.0-999.9 KCal
*IMPORTANT NOTE :
0.0-999.9 mi.
Please remember that the functions in this computer are only meant to be tools to
2 pcs of AA
monitor your workout progress; they are not meant to provide medical information
32°F - 104°F
or be used for medical purposes. Please consult a physician before beginning any
32°F - 160°F
workout program.
Key Function
MODE :
Press to select the display function of your choice.
The unit can be reset by changing battery or pressing
the MODE key for 3 seconds.
Page
16
Advertisement
Table of Contents
