Installing A Memory; Dimm Population Table - Gigabyte MD50-LS0 User Manual

1-4-2 Installing a Memory

Before installing a memory module, make sure to turn off the computer and unplug the power
cord from the power outlet to prevent damage to the memory module.
Be sure to install DDR4 DIMMs on this motherboard.
Installation Step:
Step 1. Insert the DIMM memory module vertically into the DIMM slot, and push it down.
Step 2. Close the plastic clip at both edges of the DIMM slots to lock the DIMM module.
Note: For dual-channel operation, DIMMs must be installed in matched pairs.
Step 3. Reverse the installation steps when you wish to remove the DIMM module.

1-4-3 DIMM Population Table

One Slot Channel DIMM Population Configuration Within a Channel
2
Ranks Per
Type DIMM and
Data Width
SRx4
RDIMM
SRx8
RDIMM
DRx8
RDIMM
DRx4
RDIMM
QRx4
LRDIMM
1
2
Speed (MT/s);
Slot Per Channel (SPC) and DIMM Per Channel (DPC)
3 Slot Per Channel
1DPC 2DPC
2133 1866
2133 1866
2133 1866
2133 1866
2133 2133
- 18 -
3DPC
1600
1600
1600
1600
1600
Hardware Installation