Advertisement
Quick Links
Advertisement
Related Manuals for BROSA Betty Rocking Chair
Summary of Contents for BROSA Betty Rocking Chair
- Page 1 ASSEMBLY GUIDE Betty Rocking Chair...
- Page 2 Components Upon unpacking your rocking chair from it’s delivery box, you should have the separate pieces shown below. Follow the steps on the next pages to assemble your new rocking chair. Chair body x 1 Leg x 2 Support bar x 1 Hardware A x 4 B x 4...
- Page 3 Align a leg to the underside of the chair body Step 1 so that the screw holes are overlapping. Fit a spring washer then a at washer to a bolt (A). Insert the bolt into the hole and turn the bolt with the allen until it is secure but do not tighten yet.
- Page 4 Fit the tenons on both ends of the support bar to the Step 2 mortises on the legs. Make sure that the screw holes on the support bar are facing the ground when standing upright. Insert the metal thread screw into the hole and tighten with a phillips head screw- driver.
- Page 5 Step 3 Use the allen key and phillips head screwdriver to tighten all the bolts and screws. Step 4 Gently lift the chair and place upright on a level surface. Enjoy your new rocking chair!
Need help?
Do you have a question about the Betty Rocking Chair and is the answer not in the manual?
Questions and answers