Advertisement
Quick Links
Advertisement
Related Manuals for Laser Dollhouse Designs Victorian Farmhouse
Summary of Contents for Laser Dollhouse Designs Victorian Farmhouse
- Page 1 Victorian Farmhouse assembly instructions Laser Dollhouse Designs...
- Page 2 First Floor Lay first floor upside down and assemble base supports by inserting into first floor slots. Once installed turn right side up. You should see the numbers 1A thru 1P for inserting the walls.
- Page 3 First Floor...
- Page 4 Insert walls 1A thru 1P, match the wall tabs to first floor slots.
- Page 5 Insert the small porch side frame.
- Page 6 All Plexiglass goes inside opening in walls and the frames glue to the walls to hold in place...
- Page 7 Insert porch frames...
- Page 8 Floor Assemble stairs and install prior to placing the 2 floor on as this will prevent you from inserting stairs later.
- Page 9 Floor...
- Page 10 Floor Insert safety rails on 2 floor.
- Page 11 Locate walls 2A thru 2P. Note there is no 2L or 2N.
- Page 12 Insert 2 floor porch rails.
- Page 14 All Plexi glass goes inside opening in walls and the frames glue to the walls to hold in place...
- Page 15 Floor Assemble stairs and follow same process as earlier for 2 floor.
- Page 16 Floor...
- Page 18 Ok 2 Floor complete. On to the 3...
- Page 19 Install wall 3A and 3D along with the 3 dividers in the middle.
- Page 20 Install 3 floor roof. Note that the top back goes facing up and to the rear for proper alignment.
- Page 21 Install front and rear roof panels.
- Page 22 Install walls 3A and 3B.
- Page 23 Install front alcove roof panels.
- Page 24 Install roof running rails and front facing fretwork.
- Page 27 With the steps in we are now complete with the Victorian Farmhouse. Congratulations and Thank you for your support. Laser Dollhouse Designs. www.laserdollhouses.com laserdollhouses@aol.com...