Laser Dollhouse Designs Gothic Leon Victorian Assembly Instructions Manual

Download this manual

Gothic Leon Victorian assembly instructions

Laser Dollhouse Designs

Page 1 Gothic Leon Victorian assembly instructions Laser Dollhouse Designs...
Page 2 First Floor...
Page 3 First Floor...
Page 4 First Floor...
Page 5 The base skirt will only fit easy into one area. Do not force, double check correct fit.
Page 6 Base complete. We will now work on the 1 Floor walls.
Page 8 All Plexi glass goes inside opening in walls and the frames glue to the walls to hold in place...
Page 10 Floor...
Page 11 Floor...
Page 12 First floor complete, that was not bad at all…… Let’s start the next floor walls..
Page 13 Note: 2O only used in the 1:12 scale house. For the 1:24 and 1:48 there is a stair rail...
Page 14 All Plexi glass goes inside opening in walls and the frames glue to the walls to hold in place...
Page 17 Ok 2 Floor complete. On to the 3...
Page 18 Floor...
Page 21 On to the 3 floor we go.
Page 30 Inner wall frames...
Page 31 Insert tower and third Floor rails into slots each rail has its own spot...
Page 32 Not a part of the 1:48 scale kit, only available in 1:24 & 1:12 scale.
Page 36 With the steps in we are now completed with the Leon Gothic. That is it, we are all assembled. Congratulations and Thank you for your support. Laser Dollhouse Designs. www.laserdollhouses.com laserdollhouses@aol.com...