Related Manuals for Emtec Photo Cube Photo Cube 160GB
Summary of Contents for Emtec Photo Cube Photo Cube 160GB
- Page 1 User’s Guide ENGLISH 40 000 Photos* >Store Up To 40 000 Photos* >Stocker Jusqu’à 40 000 >Speichert Bis Zu Photos*...
- Page 2 >Please read these instructions carefully before using this product.
-
Page 3: Table Of Contents
> FEATURES...4 PRODUCT OVERVIEW...5 GETTING STARTED...8 IN STAND-ALONE MODE...9 IN USB MODE...10 PARTITION THE HARDDISK...11 BACKUP OF FLASH CARD DATA...12 POWER SAVING FUNCTION...12 BATTERY CHARGE...12 ERROR SIGNAL...13 OPERATIONAL NOTES...13 TROUBLESHOOTING...14 SPECIFICATION...16 APPENDICES...17... -
Page 4: Features
1. Features : -Supporting the following flash cards: SD/MMC, Memory Stick, Memory Stick Pro and Compact Flash Type I/II, MicroDrive, Mini-SD(with adapter), RS-MMC(with adapter), MS Duo(with adapter), MS Pro Duo(with adapter) -Fast copy of flash memory cards to the built-in harddisk of the unit at any time, no computer needed. -LCD screen gives status of copy, memory size and battery level, and so on. -
Page 5: Product Overview
2. Product Overview : -Face : Flash Card Slot Cover -Down : -Please insert the plug of appropriate DC power adapter into the charger port if the portable harddisk needs to be charged. -The charge indicator light is red when the battery is charging. It will turn to be green when the battery charge is finished. -Please use appropriate USB cable to connect the unit to computer for transferring data in USB mode. -
Page 6: Left Side
-Left Side : -If you want to copy the data within CF/MD flash card, please open the card slot cover on left side and insert the flash card with face upward carefully. Note: -Please push the card slot cover to the direction of arrow on it carefully. To avoid breakage of the cover, please push it without violence. -Right Side : -If you want to copy the data within SD/MMC/MS card, please open the card slot cover on right side and insert the flash card under the guidance on the faceplate carefully. - Page 7 -LCD Display : Used Memory Size of Flash Card Flash Cards Icons USB Connected Error Signal Data Transferring Process Bar Completed Percentage of Copy/Error Code Avalilable Memory Size of the Current Partition Harddisk Icon 1 2 3 4 1 2 3 4 Current Partition’s Number Battery Indicator Data Transferring Process/...
-
Page 8: Getting Started
3. Getting Started : 1) Charging the battery : When you use this unit for the first time or when it indicates that the battery is low, you need to charge the built-in battery by DC power adapter. Please charge the battery at least 4 hours for the first time. -
Page 9: In Stand-Alone Mode
4. In Stand-alone Mode : 1) After you insert the flash card into the appropriate slot and turn on the unit, please do not start copying data from flash card into the unit until the capacity of flash card has been displayed on the LCD. Then you can press the [Copy] button to start copy. -
Page 10: In Usb Mode
USB port on your computer. •Double click “Safely Remove Hardware” icon on the task bar. •From the “Safely Remove Hardware” window, select “USB Mass Storage Device” and click “Stop”. The “Stop a Hardware Device” window will pop up. -
Page 11: Partition The Harddisk
6. Partition the Harddisk – supposed under WINDOWS 2000/XP system : 1) Click “START” menu on the task bar and select “SETTINGS” / “CONTROL PANEL” / “ADMINISTRATIVE TOOLS” / “COMPUTER MANAGEMENT”. Then Computer Management Window is opened. 2) Click on “DISK MANAGEMENT”, and disk drives currently connected to the system will be listed on the right side. -
Page 12: Backup Of Flash Card Data
7. Backup of Flash Card Data : 1) Insert flash card into card slot. 2) Press on [Copy] button and the unit begins to back up the data. 3) When the LCD displays 100%, backup is finished. 4) All copied files will be saved in the respective folders in the built-in harddisk, namely corresponding to the card, such as CF, MS, SD and MMC. -
Page 13: Error Signal
10. Error Signal : 1) The data or the flash card may have been damaged when the error icon flash card or replace it. 2) If the unit is hanging for incorrect operations, please press the [Reset] button on the right side of the unit to shut it down. -
Page 14: Troubleshooting
12. Troubleshooting : If you experience a problem with this unit, please consult the following instruction firstly. Do not disassemble, repair or remodel the product by yourself. Doing so may result in damage to the unit that is not covered under warranty. - Page 15 6) Getting no respondence to copy : •When you are copying large data from flash cards to the unit, the unit may require dozens of seconds for initialization and the LCD displays nothing. Please wait for a while. If the unit has no respondence yet for more than a minute, please press [Reset] button and redo it again.
-
Page 16: Specification
13. Specification : Subjects Build-in harddisk Power sources Supported format Supported OS Operating temperature Storing temperature Humidity Details Supports 40/80/120GB harddisk Inner: rechargeable lithium ion battery Outer: DC power adapter USB 2.0 high speed Harddisk: FAT32 Flash memory card: FAT16/FAT32 Windows 2000 SP3 or above Windows ME/XP 0°C～50°C... -
Page 17: Appendices
14. Appendices: Error Code List : Error Code Harddisk’s Error Copying Error Flash Card’s Error Details Fail to recognize the harddisk. Fail to initialize the harddisk. Fail to recognize the memory size of harddisk. Fail to read or write the harddisk. The copying card is empty. - Page 18 Francia...