Partition The Harddisk - Emtec Photo Cube Photo Cube 160GB User Manual

6. Partition the Harddisk – supposed under WINDOWS 2000/XP system :
1) Click "START" menu on the task bar and select "SETTINGS" / "CONTROL PANEL" / "ADMINISTRATIVE
TOOLS" / "COMPUTER MANAGEMENT". Then Computer Management Window is opened.
2) Click on "DISK MANAGEMENT", and disk drives currently connected to the system will be listed on the
right side. Find out the disk that indicates the portable harddisk.
3) To delete an existing partition, right click on the drive and select "DELETE PARTITION".
4) To create a new partition, right click on the drive and select "NEW PARTITION". This will open the New
Partition Wizard.
5) Select "PRIMARY PARTITION" or other types as you want and click "NEXT".
6) Because you can only create FAT32 partition, set the partition size to 32000MB or less and click
"NEXT' ("Disk Management" can not create FAT32 partitions larger than this).
7) Assign a drive letter and click "NEXT".
8) Set the file system to FAT32 and click "NEXT". (If FAT32 is not listed as an option, go back to step6 and
reduce the size to 32000MB or less.)
9) Click "NEXT" to confirm settings.
10) Click "FINISH" to close the wizard and start the partition and format process.
Note:
-Only FAT32 is supported for harddisk formatting and maximum 4 partitions. Each partition memory can
not be over 32GB.
-To avoid the unit being shut down when it is working with not enough power, please connect DC power
adapter to it during the process of partition.
P11