In Stand-Alone Mode - Emtec Photo Cube Photo Cube 160GB User Manual

4. In Stand-alone Mode :

1) After you insert the flash card into the appropriate slot and turn on the unit, please do not start copying
data from flash card into the unit until the capacity of flash card has been displayed on the LCD. Then
you can press the [Copy] button to start copy. The Data Transferring Process Bar and the Completed
Percentage of Copy will show you the progress of copy.
2) The Completed Percentage of Copy will not disappear until you remove the flash card.
3) If there is any error occurred during the copying or turning on process, an icon will blink on the LCD
screen and the corresponding error code will be displayed in place of the Completed Percentage of Copy.
(Please consult the reference of Error Code List in the appendices to get further knowledge about the error
code.)
4) You can insert two different flash cards into the unit at the same time. It will automatically copy both
cards from CF/MD to SD/MMC/MS in turn. Please turn on the unit after inserting cards. Then two icons
will be displayed on the LCD corresponding to these two cards. Now you only need to press the [Copy]
button, the data within these cards will automatically be copied to the built-in harddisk orderly.
P9