Getting Started - Emtec Photo Cube Photo Cube 160GB User Manual

3. Getting Started :

1) Charging the battery :
When you use this unit for the first time or when it indicates that the battery is low, you need to
charge the built-in battery by DC power adapter. Please charge the battery at least 4 hours for the
first time.
2) Power On/Off :
- In Stand-alone mode:
•To turn on the unit, press and hold the [Power] button and release it until the Turn On/Off Bar
is finished. If the Turn On/Off Bar is not finished yet before you release, the unit will not be
turned on.
•To turn off the unit, press and hold the [Power] button and release it until the Turn On/Off Bar
is finished. If the Turn On/Off Bar is not finished yet before you release, the unit will not be
turned off.
- In USB mode:
•To turn on the unit when it is connected to computer, press the [Power] button once and it will
be turned on. The process will not be displayed.
•To turn off the unit when it is connected to computer, please safely remove the harddisk
first (please consult the instruction of operating in USB mode in the latter part). Then press
and hold the [Power] button for about 2 seconds and it will be turned off. Or you can unplug
the USB cable directly after the unit has been safely removed.
P8