In Usb Mode - Emtec Photo Cube Photo Cube 160GB User Manual

5. In USB Mode – worked as an external hard disk :
1) Connect the unit to the computer using the USB cable and press the [Power] button to turn on the unit
afterwards. The LCD will display "USB connected" and the unit enters into USB mode.
2) Double click " MY COMPUTER" and enter into MY COMPUTER folder, you will find three removable disk
icons and two local disk icons, which indicating three kinds of flash cards and two partitions of built-in
harddisk. Now you can access your files on built-in harddisk and flash cards through your computer.
3) To avoid the damage to the unit or data loss, please follow the procedure listed below to disconnect the
unit from the USB port on your computer.
•Double click "Safely Remove Hardware" icon on the task bar.
•From the "Safely Remove Hardware" window, select "USB Mass Storage Device" and click "Stop".
The "Stop a Hardware Device" window will pop up.
•Click "OK". When the "Safe to Remove Hardware" window is displayed, you can turn off the unit and
remove it from the USB cable or remove it without turning off.
Note:
-Do not unplug the USB cable or remove the flash card from the unit when the computer is detecting for the
hardware or copy is in process. Otherwise, the computer and the unit may be hanging as well as the data
within the harddisk may be damaged and lost.
-In USB mode, the unit will be charged by the aid of USB cable when it is off. However, it will only be
supported with electronic power but not be charged through USB cable when it is on. To avoid lack of
power when the unit is used in USB mode, please connect the DC power adapter during your usage.
P10