Backup Of Flash Card Data; Power Saving Function; Battery Charge - Emtec Photo Cube Photo Cube 160GB User Manual

7. Backup of Flash Card Data :

1) Insert flash card into card slot.
2) Press on [Copy] button and the unit begins to back up the data.
3) When the LCD displays 100%, backup is finished.
4) All copied files will be saved in the respective folders in the built-in harddisk, namely corresponding to the
card, such as CF, MS, SD and MMC.
5) The copies of the same card will not be overwritten with each other since they will be saved in different
folders, which are under the same folder named after flash card. It can support maximally 99999999
folders under that folder. If there are more than 99999999 folders, please reformat the harddisk.
6) Data will be copied to the second partition when the first one is full. Meanwhile, the number "2" will be
displayed on the LCD, indicating the current fixed disk driver is the second one. Analogically, number "3" and
"4" will be displayed when the former one is full. The maximum number of partitions is 4.
7) Please do the harddisk cleanup at time to keep enough memory for copy.

8. Power Saving Function :

This unit will be shut down automatically after about 60 seconds' inactivity to save power.

9. Battery Charge :

1) Charging the battery by 5V DC power adapter or connect the unit to computer by USB cable when it is off.
•The charge indicator light will be red when the battery is charging.
•The charge indicator light signal will turn to be green when the battery charge is finished.
2) This unit can only support rechargeable lithium ion battery.
P12