Viessmann VITODENS 200-W Installation And Service Instructions Manual page 13

Mounting the boiler and making connections
3. Danger
Avoid injury to the hands.
Do not grip the boiler in the rear section of
the side panels. Hatched area in the dia-
gram.
Fitting the boiler:
Align the boiler with the outer ends of the wall
■
mounting bracket.
■ Lower the boiler vertically into position.
■ The supporting surface of the boiler must rest on
the fitting assembly.
4. Take 4 screws from the installation kit and screw
them into the fitting assembly from below.
!
Please note
The screws must be inserted
to fasten the boiler securely.
!
Please note
Tighten screws enough
to ensure the components do not suffer
damage and will function correctly.
Never tighten the screws with a cordless
screwdriver. The screws must be inserted to
fasten the boiler securely.
Note
When correctly installed, the boiler will not rest on
the hooks of the wall mounting bracket (see dia-
gram).
(cont.)
5. Tighten the union nut on the gas pipe.
!
Please note
Tighten screws enough
to ensure the components do not suffer
damage and will function correctly.
Installation sequence
13