Daytime Running Lamps (Drl); Headlamp Leveling Control; Hazard Warning Flashers - Chevrolet Captiva Owner's Manual

Hide thumbs Also See for Captiva:
Table of Contents

Advertisement

Chevrolet Captiva Owner Manual (GMNA-Localizing-MidEast LHD-
14860584) - 2021 - CRC - 5/18/20
94
Lighting
To switch from high beam to low beam, pull
the control lever until it returns to the
normal position.
When approaching an on-coming vehicle or
the vehicle ahead, switch from high beam to
low beam. High-beam headlamps beam can
make other drivers feel temporarily blind
and cause a crash.
Headlamp Flashing
To activate headlamp high beam flashing,
pull the lamp control lever and then
release it.
The control lever will return to the normal
position as you release it.
Before you release the control lever, the
high-beam headlamps stay on.
Headlamp OFF Delay
To trigger the headlamp OFF delay function,
turn off the headlamp and pull the light
control lever for one second. Pull the light
control lever twice after you shut down the
engine and turn the ignition switch to ACC
or LOCK position, or after you pull out the
key. After remote locking, the low beam
lamp will turn off after 30 seconds; if the
vehicle is not remotely locked, the low
beam lamp will turn off after 10 minutes.
Lamp ON Reminder
If any lamp switch is not turned to the OFF
position after you turn the ignition to LOCK
or pull out the key, a chime will sound as
the driver door is opened. The chime stops
after the lamp is turned off.

Daytime Running Lamps (DRL)

The Daytime Running Lamps turn on
automatically as the engine starts; they go
out automatically as the position lamp is
turned on.

Headlamp Leveling Control

The headlamp leveling knob is at the left
side of the instrument panel.
Adjust the headlamp leveling to the vehicle
load for the best lighting and to avoid glare.
Turn the knob to the desired position:
0 = front seats occupied
1 = all seats occupied
2 = all seats occupied with the luggage
compartment loaded
3 = driver seat occupied with the luggage
compartment loaded

Hazard Warning Flashers

Press
to turn on/off the hazard flasher.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents