Chevrolet Captiva Owner's Manual page 83

Chevrolet Captiva Owner Manual (GMNA-Localizing-MidEast LHD-
14860584) - 2021 - CRC - 5/18/20
The displayed fuel range is calculated based
on the current fuel consumption and the
amount of fuel left in the tank. It changes
as the driving condition changes. When the
fuel level low warning indicator illuminates,
fuel insufficient, add fuel will appear in
the fuel range indication area.
Press and hold OK on the current interface
to clear the driving time. The fuel range
cannot be cleared.
Interface 5 Tire Pressure Indication
The tire pressure monitor system (TPMS)
displays the current pressure and
temperature of the four tires respectively.
When the system detects tire pressure low
or high, it gives a prompt, asking you to
adjust the tire pressure.
For the standard tire pressures, see Tire
Pressure 0 158.
If the tire temperature value becomes
extremely high, for example, when you are
driving down a slope and apply the brake
frequently, stop the vehicle to cool down
the tires. If the shown tire temperature
value becomes abnormal, see your dealer as
soon as possible.
Keep the tire pressure within the reference
range, otherwise the tire service life and
vehicle controllability can be reduced. A flat
tire can also occur, which is very dangerous.
Do not continue driving if the tire
temperature is extremely high. Once
overheated, the brake may fail to provide
sufficient braking force and the tire may
become flat.
Stop the vehicle as soon as possible to cool
down the tire and have it inspected.
Instruments and Controls
Vehicle Information Setup Option
This option allows access to fault
information inquiry, fatigue driving setup
and display language setup. Pull the up/
down selection button and then press OK to
enter the interface.
The control button on the steering wheel
will be disabled as a warning message
appears on the display screen. The control
button will not work until the warning
message disappears.
Interface 1 Fault Information Inquiry
Press OK to enter the fault information
inquiry interface. If no fault information is
shown, a prompt saying no fault
information exists will appear on the LCD; if
83