Chevrolet Captiva Owner's Manual page 132

Chevrolet Captiva Owner Manual (GMNA-Localizing-MidEast LHD-
14860584) - 2021 - CRC - 5/18/20
132 Driving and Operating
The driver depresses the brake pedal to stop
the vehicle after the function is activated,
or the driver depresses the brake pedal
when the vehicle is motionless and the
engine idles. After the brake pedal is
released, the hydraulic pressure in the brake
system will be kept to park (whether on
downhill or uphill pavement or on flat
ground), at the time there is no need to
draw back EPB to park.
If the driver depresses the accelerator and
releases the clutch to start the vehicle
within 5 minutes, the hydraulic pressure in
the brake system will be automatically
released and the parking will be released, so
as to start the vehicle; 5 minutes later, it
will automatically switch to the EPB caliper
to clamp and park, and the hydraulic
pressure in the brake system will be
released.
Start and shutdown of AVH can be
memorized. If AVH is in the on/off state
when the power is off last time, AVH keeps
in the corresponding state when the power
is on next time.
Automatic Vehicle Hold (AVH) Switch,
if Equipped
When the engine has been in operation, the
driver s seat belt is tightened, and the
driver s side door has been closed, you have
to press the AVH switch, and the
background lamp on the switch illuminates
to activate the AVH function.
Afterwards, if following conditions are met,
the AVH working indicator on the
instrument cluster illuminates. The parking
brake will function and the brake system
applies the braking force to park the vehicle.
AVH Conditions (AVH Function Activated
First):
1. The vehicle is motionless and the engine
is running.
2. The brake pedal is depressed to a degree
(brake hydraulic pressure greater than
4 bar).
3. The driver s seat belt is tightened and
the driver s side door has been closed.
Other Conditions (All Conditions Must
Be Met):
No fault exists on the system.
EPB has been released.
The accelerator pedal has not been
depressed (opening less than 2%).
How to Manually Release Automatic Parking
Brake After AVH?
Confirm that the ignition switch is at the
ON position, depress the brake pedal, and
press the EPB switch. The AVH working
indicator goes out and the automatic
parking brake is released.
Automatic Release After AVH
You do not have to manually press the EPB
switch to release when starting the vehicle
next time after AVH. Automatic release will
be done when the system detects that you