UniGuard UM740 User Manual

UniGuard UM740 User Manual

Vehicle gps tracker

Advertisement

Quick Links

UniGuard Technology Limited
Vehicle GPS Tracker
User Manual
UM7 4 0
1
-
-
www.uniguardgps.com

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the UM740 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for UniGuard UM740

  • Page 1 UniGuard Technology Limited Vehicle GPS Tracker User Manual UM7 4 0 www.uniguardgps.com...
  • Page 2 UniGuard Technology Limited 1 Product Instructions It is a mini GPS Tracker, built-in GPS Antenna and GSM Antenna, Size: 65*35*15mm, Weight: 75g, it can send vehicle location and status to mobile and Internet. It can track the vehicles remotely. Track the vehicle on the computer Web and mobile APP.
  • Page 3 UniGuard Technology Limited 1.1 Features 1. Real time tracking by web and APP 2. Location tracking by SMS command 3. ACC On/Off detection 4. Alarm on web: Overspeed, Geo-fence, Route deviation 5. Remote engine cut (Connect with relay) 1.2 Specifications...
  • Page 4 UniGuard Technology Limited 1.3 Installation Figure 1.2.1 Check products to see if there is any accessory missing. Please contact us immediately. 1.2.2 Insert SIM card Don't insert the SIM card up-side-down. Make sure the SIM card with GPRS service. If the SIM card has been inserted, but it requires you to input SIM PIN, please close the SIM PIN function under the instruction of your mobile phone user ’s manual.
  • Page 5 UniGuard Technology Limited 1.2.4 Wiring Diagram ACC wire(Orange) must be connected to ensure stable function. 2 SMS Operation Instruction Function SMS command Reply Center number config admin123456 TEL Check status check123456 P4_2019/01/02 16:26ID:866126040000241 IP:www.gpspos.net:8000 APN:CMNET GPS:0,V:0,T:19-3-15 4:16:25 GSM:20,VIB:0,JT:1,TAMPER:0,S:0,R:0,0,188… Location query...
  • Page 6 UniGuard Technology Limited Power,0 Close external power alarm successfully Alarm: External power supply is off. Vibration alarm setup vibalm,1 Open vibration alarm successfully vibalm,0 Close vibration alarm successfully. Vibration level setup vib,x x=1 or 2 or 3 v=0 is to close vibration alarm Set vibration sensitivity successfully.

Table of Contents