Filter Holders - Cimbali M100 RE Use And Installation

CHANGING THE WATER IN THE BOILER - Procedure to carry out at least once a day
1
Press the icon .
FILTER-HOLDERS -
1
In a suitable container that is
neither aluminium or iron, pour
a litre of hot water (122÷176°F;
50÷80°C) and 10 g of detergent
powder, equal to two teaspoons.
4
Remove any residue with a non-abrasive sponge and rinse
well with running cold water.
2
Press the icon
2
34 EN
3
The following message will be
.
displayed: "WATER CHANGE". The
water from the boiler will drain from
the hot-water nozzle (60 - 70% ca. of
the total capacity).
Dispensing will stop automatically.
After the procedure, the machine will
return to its normal functions and the
5
A
the anchoring spring (A
WATER CHANGE
021%
3
holders in this solution for
about 15 minutes.
NOTE! Only immerse the
metal parts.