Spirit XT385 Owner's Manual page 17

TO TURN TREADMILL OFF
1. Display will automatically turn off (go to sleep) after 30 minutes (no key operations). The
treadmill will draw very little current in display mode (about as much as your television
when it is turned off).
2. Remove the tether cord.
3. Turn off the main switch on the front of the treadmill, below the motor cover.
PROGRAM KEYS
The program keys are used to preview each program. When you first turn the console on you
may press each program key to preview what the program profile looks like. If you decide that
you want to try a program, press the corresponding program key and then press the Enter key
to select the program and enter into the data-setting mode.
The treadmill has a built in heart rate monitoring system. Simply grasping the hand pulse
sensors on the stationary handle bars or wearing the heart rate transmitter (see Using Heart
Rate Transmitter section) will start the Heart Icon blinking (this may take a few seconds). The
Pulse Display Window will display your heart rate, or Pulse in beats per minute.
The console includes a built-in fan to help keep you cool. To turn the fan on, press the key on
the left side of the console.
Customer Service 1-888-707-1880
Email: customerservice@dyaco.ca
17
Dyaco Canada Inc. 2016