Table of Contents
Advertisement
Power On/Off the Display
Power on your display using the remote control or the power button on the bottom, right-hand side of
the display. The display will power on but image may not appear for several seconds as it completes
its power up sequence.
Point the remote control at the IR sensor located
at the top, left-hand corner of the display when in
landscape, or the top right-hand corner when in
portrait, then press the power button.
Landscape
orientation
Onboard Controls
Direct Mode: Allows for quick access to source selection, volume settings and channel selection.
Menu Mode: Press the Menu button to access Menu Mode and activate the On Screen Display
(OSD). For a description of OSD operation refer to the next section.
The keypad buttons are assigned as indicated in the table below.
Direct Mode
On/Off
Input Select
Menu
Channel Up
Channel Down
Volume Up
Volume Down
OPERATING INSTRUCTIONS
Menu Mode
On/Off
Input Select
Return
Up
Down
Right/OK
Left/OK
LED Light
Solid
Blinking
Off
Network Functionality:
Allow a boot cycle time of approximately
2 minutes and 20 seconds for network
functionality. Accessing the network functions
prior to the completion of the boot cycle will
results in a "Not Ready" exclamation.
16
2020-11-13
TV Status
Off
Boot up
On
#:180-9149-6
(2021-11-02)
Advertisement
Table of Contents
