Operating Instructions; Power On/Off The Display; Onboard Controls - peerless-AV XTREME User Manual

Power On/Off The Display

Power on your display by using the remote control or the power button on the bottom, left-hand
side of the display. The display will power on but image may not appear for several seconds as it
completes its power up sequence.
Point the remote control at the IR sensor located
at the top, left-hand corner of the display when in
landscape, or the top right-hand corner when in
portrait, then press the power button.

Onboard Controls

Direct Mode: Allows for quick access to source selection, volume settings and channel selection.
Menu Mode: Press the Menu button to access Menu Mode and activate the On Screen Display
(OSD). For a description of OSD operation refer to the next section.
The keypad buttons are assigned as indicated in the table below.
Direct Mode
On/Off
Input Select
Menu
Channel Up
Channel Down
Volume Up
Volume Down

OPERATING INSTRUCTIONS

Menu Mode
On/Off
Input Select
Return
Up
Down
Right/OK
Left/OK
LED Light
Solid
Blinking
Off
17
2018-05-30
TV Status
Off
Boot up
On
#:180-9116-7 (2020-08-04)