Operating Instructions; Power On/Off The Display; Onboard Controls - peerless-AV XTREME XHB432-EUK User Manual

High bright outdoor display

Hide thumbs

Table of Contents

Available languages

Power On/Off The Display

Power on your display by using the remote control or the power button on the bottom, left-hand

side of the display. The display will power on but image may not appear for several seconds as it

completes its power up sequence.

Point the remote control at the IR sensor located

at the top, left-hand corner of the display when in

landscape, or the top right-hand corner when in

portrait, then press the power button.

Onboard Controls

Direct Mode: Allows for quick access to source selection, volume settings and channel selection.

Menu Mode: Press the Menu button to access Menu Mode and activate the On Screen Display

(OSD). For a description of OSD operation refer to the next section.

The keypad buttons are assigned as indicated in the table below.

Direct Mode

Channel Up

Channel Down

Volume Up

Volume Down

Input Select

On/Off