peerless-AV XTREME XHB553 User Manual page 22

Navigating the On-Screen Menu
Network Information
Allows the user to get a visual readout of the IP information that the display
has been issued. Display default is DHCP (IP Information can be viewed
through the web page).
Sensor Information
Allows the user to get a visual readout of the sensors with the display that
are used for monitoring the health and wellness (Sensor Information can be
viewed through the web page).
Peerless-AV Technical Support
Allows the user to see model number, serial number, and firmware revision.
Restore Factory Default
Allows the user to set the display to factory default settings.
peerConnect
Allows the user to set the display to react to CEC (Consumer Electronic
Control) for ease of navigation when using a source that complies with the
CEC standard.
Auto Source Switching
Allows user to set the display to search for a content signal if the signal on the
main source ceases.
Priority Source Recovery
Allows the user to initiate the display to look for a specific input defined by
"Primary" and "Secondary"; If the Primary source is removed, the priority
becomes what is chosen as "Secondary".
Primary Source
Allows the user to indicate the main source input.
Secondary Source
Allows the user to set the secondary priority source if content ceases on the
primary source input.
Software Update
Allows the user to issue a software update through the USB media port when
available.
TV/SPK
1 2 3
4 5 6
7 8 9
• 0 LAST
OK
MUTE MENU
INPUT
VOL CH
INFO
EXIT
Navigate
Setup
Auto Source Switching
OK OK EXIT OK
Enter
22
EXIT OK EXIT MENU EXIT MENU
Exit
2020-11-13
(Information Only)
(Information Only)
(Information Only)
Yes / No
On / Off
On / Off
On / Off
AV / DP / HDMI 1 /
HDMI 2 /
USB Media
AV / DP / HDMI 1 /
HDMI 2 /
USB Media
Yes / No
MENU
Return
#:180-9149-6 (2021-11-02)