peerless-AV XTREME XHB553 User Manual page 5

• Never apply pressure to the exterior of the LCD screen.
• If monitor or glass is broken, do not come in contact with the liquid crystal and handle with care.
• Do not climb on the product.
• Do not install within five feet from a body of water.
• Do not use if ambient air temperature exceeds the operating limits; Maximum operating
temperature is -31°F ~ 140°F (-35°C ~ 60°C).
• High solar loads may require reducing maximum operation temperature up to 14°F (8°C) to
reduce the possibility of temporary screen artifacts.
• Do not install in enclosure or recessed cavity with less than 2 inches of airflow around the
display. Air inside fully encased display must be ventilated. Installations within any third party
enclosure without written authorization from Peerless-AV are not covered by the Peerless-AV
Limited Warranty, nor any extended warranty.
• When installing in an enclosure or recessed cavity, the internal temperatures of those locations
must not exceed the maximum operating temperatures as listed above.
• The product is to be secured to building before operation.
• Product must be carried and supported by at least two persons.
• Periodically clean dust off the electrical plug to keep it clean and dry, ensuring proper and safe
operation.
• Only use attachments/accessories specified by the manufacturer.
To avoid image retention/burn-in on the LCD screen, do not allow static images to display for
longer than 20 minutes at a time. Image retention is considered improper use of an LCD and is not
covered by the Peerless-AV Limited Warranty, nor any extended warranty.
Tools Needed for Assembly.
5mm
WARNING
CAUTION
5
2020-11-13 #:180-9149-6 (2021-11-02)