Philips Sonicare ExpertResults 7000 Manual page 15

15
English
- The pressure you apply when you brush
- The time you have brushed with the brush head
Once your brush head is no longer effective, the
brush head replacement reminder will blink amber.
This indicates that it is recommended to change
your brush head.
Note: The brush head replacement reminder
comes activated with your product. To deactivate
this feature, see 'Activating or deactivating
features'.
Pressure sensor
Your Philips Sonicare measures the pressure you
apply while brushing to protect your gums and
teeth from damage.
If you apply too much pressure, the handle will
change its vibration until you reduce the pressure.
Note: The pressure sensor comes activated with
your product. To deactivate this feature, see
'Activating or deactivating features'.
Brush head mode pairing
Brush heads with BrushSync technology are
equipped with an RFID chip. The chip
communicates to the handle and automatically
pairs it with the recommended mode and intensity.
Note: If you change modes/intensity, the handle
will remember the last used setting. If you wish to
brush with the recommended setting, you can find
the recommended modes/intensity in 'Brushing
Modes'.
QuadPacer
The QuadPacer feature indicates via a brief
change in vibration when you are supposed to
move onto the next brushing section.