Viking K-1775-3 Series Product Manual

Viking K-1775-3 Series Product Manual

Vandal resistant entry phones with built-in keypad, proximity card reader, and color video camera

Advertisement

Quick Links

Designed, Manufactured and Supported in the USA
VIKING
S E C U R I T Y & C O M M U N I C A T I O N S O L U T I O N S
Vandal Resistant Entry Phones with Built-In Keypad,
Proximity Card Reader, and Color Video Camera
The K-1775-3 Series entry phones provide a tough and
attractive handsfree phone for commercial, apartment, and
residential door entry or applications requiring a vandal
resistant speaker phone with built-in 125 KHz Proximity Card
Reader and analog Color Video Camera. The card reader
outputs industry standard 26-bit Wiegand data, allowing it to
be used with a Viking ES-1 or C-4000 door controller or any
controller compatible with 26-bit Wiegand format. The
K-1775-3 Series entry phones are available in two attractive
finishes: "brushed stainless steel" and "oil rubbed bronze".
When the "Call" button is pressed, the K-1775-3 returns dial
tone. The keypad may then be used to dial any number. If
no Touch Tone is entered within 8 seconds, CPC is detected,
a busy signal is detected, or the programmable maximum call
time has elapsed, the K-1775-3 will automatically disconnect.
Alternatively, the K-1775-3 may be disconnected by pressing
the "Call" button again. The K-1775-3 provides CCTV video
of the entry area and comes complete with a standard, flush
mount, rough-in box. In addition, an optional VE-6x7 weather
resistant, surface mount box is available (see DOD 424).
Features
• Built-in 125KHz 26-bit Wiegand proximity card reader with LED and
beep card read confirmation and EWP board protection
• Built-in high resolution analog NTSC color video camera with wide
viewing angle, tilt/swivel adjustments, and operating temperature
of -40°F to 140°F
• Audio and video transmission on one CAT5E cable (see page 6)
• Compatible with the following Viking Proximity Cards and Fobs:
PRX-C, PRX-C-ISO and PRX-FOB (DOD 198)
• Vandal Resistant Features: 14 gauge louvered 316 stainless
steel faceplate with permanent laser etched graphics, stainless
steel "Call" button, heavy duty metal keypad and T-10 Torx
security screws, scratch resistant powder coating (K-1775-3-BN)
• Weather Resistant Features: Marine grade 316 stainless steel
faceplate, screws and and push button switch. Switch internally
sealed per IP67. Mylar speaker. Self-draining mic mount.
Faceplate, mic and speaker gaskets. Weather Resisant powder
paint (K-1775-3-BN)
• K-1775-3-EWP is designed to meet IP66 Ingress Protection
Rating (see DOD 859 for more information)
• Available in 2 standard faceplate finishes: 316 brushed stainless
steel or oil rubbed bronze powder paint
• Blue "in use" LED
• Telephone line powered
• Volume adjustments for microphone and speaker
• Advanced call progress detection: disconnects on busy signal,
return to dial tone, CPC, reorder tone, maximum call time out and
40 second silence time out
• Selectable auto-answer feature for monitoring
• Zinc plated steel rough-in box with (2) 3/4" conduit knockouts
PRODUCT MANUAL
K-1775-3
"Brushed Stainless Steel"
(similar to brushed nickel)
The K-1775-3-EWP shares all of the features of the K-1775-3
in addition to Enhanced Weather Protection (EWP) for outdoor
installations where the unit is exposed to precipitation or
condensation. EWP products feature foam rubber gaskets
and boots, sealed connections, gel-filled butt connectors, as
well as urethane or thermal plastic potted circuit boards with
internally sealed, field-adjustable trim pots and DIP switches
for easy on-site programming. For more info, see DOD 859.
Applications
• Apartment entry phone when used with the K-1900-3 Apartment
Entry Dialer or C-4000 Apartment/Office Entry Controller or
C-3000 Apartment Entry Controller
• Use with a Viking C-500 to control 1 or 2 (expandable to 8)
K-1775's and door/gate control on a single phone line (DOD 177)
• Use with a Viking C-2000B to control 1 to 4 K-177 5's and
door/gate control on a single phone line (DOD 156)
• Courtesy and customer assistance phone
• Automated teller (ATM) phone
• Use with a Viking ES-1 for proximity card reader door control
• Provide unique front and back door chimes and paging when use
with a Viking SLP-1 or SLP-4 and C-2000B
• Kiosk phone with (100 number speed dialing) when used with the
K-1900-9 Multi-Number Dialer (DOD 321)
• Use with Viking's Proximity Cards: PRX-C, PRX-C-ISO, PRX-FOB
(DOD 198)
Specifications
Dimensions: Overall: 5.5" x 6.5" x 2.6" (140mm x 165mm x 66mm),
Rough-in box: 4.5" x 5.5" x 2.5" (114mm x 140mm x 64mm)
Shipping Weight: 3.5 lbs (1.6 kg)
Environmental: -30°F to 150°F (-34°C to 65°C)
Humidity - K-1775-3: 5% to 95% non-condensing
Humidity - K-1775-3-EWP: Up to 100% condensing
(see page 2 for complete specifications)
K-1775-3 Series
Video Entry Phones with
Keypads and Card Readers
February 15, 2018
K-1775-3-BN
"Oil Rubbed Bronze"
(satin dark brown powder paint
with fine copper metallic)

Advertisement

Table of Contents
loading

Summary of Contents for Viking K-1775-3 Series

  • Page 1 • Built-in high resolution analog NTSC color video camera with wide viewing angle, tilt/swivel adjustments, and operating temperature • Use with a Viking C-500 to control 1 or 2 (expandable to 8) of -40°F to 140°F K-1775’s and door/gate control on a single phone line (DOD 177) •...
  • Page 2: Specifications

    80° Lens FOV illuminators. If IR illumination is required, you will need to replace Rotate Rotate the exisiting camera with a Viking model VCAM-1IR, see DOD# 190. Left 30° Right 30° Maximum Wire Run Length:1000 ft with *RG59/RG6 for video and CAT5 for power (1 pair) and entry phone audio (1 pair).
  • Page 3: Installation

    (shown right) and fasten a wire 4.04” with spade terminal (included) from the mounting screw to Earth Ground (grounding rod, water pipe, etc.) Spade Terminal (included) To Optional Viking Entry Controllers (not included) *** Earth Ground (optional) Model DOD# Description...
  • Page 4 Shack part #278-252) equipment, video encoder (Axis M7011), etc. Twisted foil and braided shield *** For ease of installation, a Viking 12V DC Female "F" to Wire Converter Cable can Adapter Yellow/Red be used (Part # 261217) or "BNC" to wire...
  • Page 5: Adjusting The Camera

    OPER faceplate from being viewed in the video +/- 20 degrees maximum image, do not rotate the camera beyond 30 degrees or tilt beyond 20 degrees. VIKING © Programming A. DIP Switches Microphone Volume Speaker Volume Switch 1 Switch 2 Maximum Call Time...
  • Page 6: Operation

    The K-1775-3 proximity card reader operates completely independently of the K-1775-3 phone board. When connected to an Viking ES-1 or C-4000 (or equivalent card reader controller) the red LED will light, indicating the card reader is powered. The LED will turn off and the transducer will beep indicating a card scan.
  • Page 7 * Note: Maximum Wiegand run length is 1000 feet using 24 gauge wire when using the Viking model PRX-1 proximity card reader, 300 feet for the PRX-2 card reader/keypad, 1000 feet for the PRX-3 (using 3 wire pairs for power), and 2000 feet for the PRX-4 keypad.
  • Page 8: Warranty

    TWO YEAR LIMITED WARRANTY Viking warrants its products to be free from defects in the workmanship or materials, under normal use and service, for a period of two years from the date of purchase from any authorized Viking distributor. If at any time during the warranty period, the product is deemed defective or malfunctions, return the product to Viking Electronics, Inc., 1531 Industrial Street, Hudson, WI., 54016.

This manual is also suitable for:

K-1775-3K-1775-3-bnK-1775-3-ewp

Table of Contents