Electronic Control - Riello Array AR 399 SE Installation, Operation And Service Manual

3.17 Electronic control

The electronic control interface menu is multi-level.
Navigation between the various levels is shown in the figures below.
Level 0 displays the Home Screen (Home). Level 1 displays the Main Menu screen. The subsequent levels are activated depending on
available sub-menus. For the full layout, see section "Control panel". For how to access and change the parameters, see the picture on
the next page. The parameters for the installer are accessible only after entering the security password (see section "Control panel").
Please note that the boiler's operating parameters are identified with a number, all other additional functions are simply descriptive.
53.6 °F
" "
CH Setpoint
" "
1 2 6 3 4 6 5
Level 0 Level 1
04:29
118.4 °F
" "
Menu
" "
Central Heating (CH)
" "
Domestic Hot Water (DHW)
" "
Information
" "
S ettings
" "
Menu
" "
Domestic Hot Water (DHW)
" "
Information
" "
Settings
" "
S ystem Test
" "
Settings
"
G eneral Settings
"
Boiler Settings
"
1 switches on the main menu
2 in menu navigation, it enables you to exit a menu item
and go back to the previous one
3 supports selecting menus or parameters or decreasing
numeric values
4 enter
5 supports selecting menus or parameters or increasing
numeric values
6 supports moving to the RH/LH area of the display
Level 2
"
"
"
Boiler Settings
" "
Boiler Parameters
" "
Module Cascade Settings
" "
Boiler Cascade Settings
" "
Service
" "
29
Level 3 Level 4
Boiler Parameters
" "
"
(1) CH Mode 0
" " "
(3) CH Setpoint 185.0 °F
" " " "
(185) Calc. Setp. Offset 0.0 °F
" " " " "
(110) CH Min Setpoint 86.0 °F
"
" " " "
Boiler Parameters
" "
(1) CH Mode 0
" "
(3) CH Setpoint 185.0 °F
" " " " "
(185) Calc. Setp. Offset 0.0 °F
" " " "
(110) CH Min Setpoint 86.0 °F
" " " " "
Boiler Parameters
" "
(1) CH Mode 0
" "
(3) CH Setpoint 186.8 °F
" " " "
(185) Calc. Setp. Offset 0.0 °F
" " " "
(110) CH Min Setpoint 86.0 °F
" " " "
Boiler Parameters
" "
(1) CH Mode 0
" "
(3) CH Setpoint 186.8 °F
" " " "
(185) Calc. Setp. Offset 0.0 °F
" " " "
(110) CH Min Setpoint 86.0 °F
" " " "
INSTALLATION