Traffic Information; Tuner Setup - Kenwood KW-M560BT Instruction Manual

Tuner
Traffic Information (FM only)
You can listen and watch the traffic information
automatically when a traffic bulletin starts.
However, this feature requires a Radio Broadcast
Data System that includes the TI information.
1
Touch [ ] on the left side of the screen.
Touch [TI].
h Traffic information mode is set.
h
Ñ
When the traffic bulletin starts
The Traffic Information screen appears
automatically.
20

Tuner Setup

You can set tuner related parameters.
1
Touch [
].
2
Touch [ ] on the left side of the screen.
Touch [SETUP].
h Tuner SETUP screen appears.
h
3
Set each item as follows.
[RDS CT] (FM only)
■
Synchronizing the Radio Data System station
time data and this unit's clock.
"ON" (Default), "OFF"
[Area Setting]
■
The tuner channel interval changes
depending on the area where you use this
unit.
[North America] (Default): Select this when
using in North America. FM/AM intervals
are set to 200 kHz/10 kHz.
[South America]: Select this when using in
South America. FM/AM intervals are set to
50 kHz/10 kHz.
[Europe]: Select this when using in any other
areas. FM/AM intervals are set to 50 kHz/9
kHz.