Controlling General Audio - Kenwood KW-M560BT Instruction Manual

Controlling Audio
[Tweeter] (Only for Front)
■
You can set the tweeter when you are
selecting front speakers.
[None], [Small], [Medium], [Large]
■ [Xʼover]
Displays the speaker crossover setup screen.
You can adjust the crossover setup that was
set automatically when you selected the
speaker type.
For details, see Crossover network setup
(P.42)
Ñ
Crossover network setup
You can set a crossover frequency of speakers.
1
Touch [Xʼover].
2
Touch the speaker to set.
3
Set each item as follows.
[HPF FREQ]
■
High Pass Filter adjustment. (When front or
rear speaker is selected on Speaker Select
screen)
[LPF FREQ]
■
Low Pass Filter adjustment. (When subwoofer
is selected on Speaker Select screen)
1
■ [Slope]*
Sets a crossover slope.
■ [Gain]
Adjusts the front speaker, rear speaker, or
subwoofer level.
42
[TW] (Tweeter) [Gain]*
■
Adjusts the tweeter level. (When front is
selected on Speaker Select screen)
[Phase Inversion]*
■
Sets the phase of subwoofer output.
Check [Phase Inversion] to shift the phase
180 degrees. (When subwoofer is selected
on Speaker Select screen)
Only when "[LPF FREQ]"/"[HPF FREQ]" is
*
1
set to a mode other than "[Through]" in
[Xʼover].
* Only when "[Tweeter]" is set to "[Small]",
2
"[Medium]", "[Large]" in [Speaker Setup].
* Only when "[Subwoofer]" is set to a mode
3
other than "[None]" in [Speaker Setup].

Controlling General Audio

1
Press the [FNC] button.
h FUNCTION screen appears.
h
2
Touch [
].
h Audio screen appears.
h
3
Touch [Fader / Balance].
4
Set each item as follows.
[Fader] / [Balance]
■
Adjust the volume balance around the
touched area.
[C] and [D] adjust the right and left volume
balance.
[R] and [S] adjust the front and rear volume
balance.
■ [Center]
Clear the adjustment.
2
3