Tuner; Tuner Basic Operation - Kenwood KW-M560BT Instruction Manual

Tuner

Tuner

Tuner Basic Operation

Most functions can be controlled from the
source control screen.
To enter Tuner source, touch [Tuner] icon in the
source selection screen. (P.9)
Control screen
1
2
5
6
3
Open the drawer
5
Information display
1
Displays the information of the current station:
Frequency
Touching [ ] allows you to switch between
Content A and Content B.
– Content A: PS name, Radio Text, PTY Genre
– Content B: Radio Text plus, Title Artist
[Preset#]: Preset number
Seek mode
2
Switches the seek mode in the following
sequence; [AUTO1], [AUTO2], [MANUAL].
• [AUTO1]: Tunes in a station with good
reception automatically.
• [AUTO2]: Tunes in stations in memory one
after another.
• [MANUAL]: Switches to the next frequency
manually.
18
Operation keys
3
• [E] [F] : Tunes in a station. The method of
frequency switching can be changed (see 2
in table).
• [ ] : Touch to mute or not to mute.
Preset list
4
• Touch on the right side of the screen to
4
display the Preset list. Touch again to close
the list.
• Recalls the memorized station.
• When touched for 2 seconds, stores the
current receiving station in memory.
Function panel
5
Touch on the left side of the screen to display
the function panel. Touch again to close the
panel.
• [TI] (FM only): Sets the traffic information
mode on. For details, see Traffic Information
(P.20).
• [SETUP]: Displays the Tuner SETUP screen. For
details, see Tuner Setup (P.20).
4
• [AME]: Presets stations automatically. For
details, see Auto memory (P.19).
• [PTY] (FM only): Searches a program by setting
7
program type. For details, see Search by
program type (P.19).
• [MONO] (FM only): Select the Monaural
reception.
6
[FM] [AM]
Switches the band.
Indicator Items
7
• [ST]: A stereo broadcast is being received.
• [MONO]: The forced monaural function is on.
• [TI]: Indicates the reception state of traffic
information.
White: TP is being received.
Orange: TP is not being received.