Kenwood KW-M560BT Instruction Manual page 82

Bluetooth Control
Ñ
Receive a call
1
Touch [ ] to answer a phone call or [
to reject an incoming call.
NOTE
• While monitoring the view camera, this screen
does not appear even if a call comes in. To
display this screen, return the shift knob of car to
the driver position.
To end call
1
While talking, touch [
20
]
].
Ñ
Operations during a call
● Adjust the receiver volume
Press the [−] or [＋] button.
● Output the dial tone
Touch [DTMF] to display the tone input screen.
You can send tones by touching desired keys on
the screen.
● Switching the speaking voice output
Touching [
]/ [
speaking voice output between cell-phone and
speaker.
● Call-waiting
When you receive a call while talking on another
call, you can answer the newly received call by
touching [ ]. The current call is on hold.
Each time you touch [ ], the caller will change.
When you touch [ ], the current call will end
and switch to the call in hold.
] each time switches the