Yamaha XSR900 Owner's Manual page 26

Instrument and control functions
Air temperature
1
2
3
4
5
1. Air temperature display
6
This display shows the air temperature
from –9 C to 99 C in 1 C increments.
The temperature displayed may vary
7
from the actual ambient temperature.
TIP
8

When the air temperature is below
–9 C, "Lo" will be displayed.
9

The accuracy of the temperature
reading may be affected when
10
riding slowly (under 20 km/h [12
mi/h]) or when stopped at traffic
signals, railroad crossings, etc.
11
12
Clock
1
1. Clock
The clock uses a 12-hour time system.
When the vehicle is turned off, the clock
can be viewed by pushing the bottom
set button.
To set the clock
1. Turn the main switch on.
2. Switch the display to the clock.
3. Push the bottom set button and top
set button together for two sec-
onds and the hour digits will start
flashing.
4. Push the top set button to set the
hours.
5. Push the bottom set button and the
minute digits will start flashing.
3-11
6. Push the top set button to set the
minutes.
7. Push the bottom set button to con-
firm settings and start the clock.
TIP
When setting the hours and minutes,
push the top set button briefly to in-
crease the increment value one by one,
or push and hold the button to increase
1
the increment value continuously.
Brightness control
1. Brightness level display
The brightness level of the multi-func-
tion meter unit panel can be adjusted to
six brightness level settings.
1