Yamaha XSR900 Owner's Manual page 25

TIP
If traveling at speeds under 20 km/h (12
mi/h), "_ _._" is displayed.
Average fuel consumption
1. Average fuel consumption display
This display shows the average fuel
consumption since it was last reset.
The average fuel consumption display
can be set to either "AVE_ _._ km/L" or
"AVE_ _._ L/100 km", or when using
miles, to "AVE_ _._ MPG" as well.

"AVE_ _._ km/L": The average dis-
tance that can be traveled on 1.0 L
of fuel.

"AVE_ _._ L/100 km": The average
amount of fuel necessary to travel
100 km.

"AVE_ _._ MPG": The average
distance that can be traveled on
1.0 Imp.gal of fuel.
To switch the average fuel consump-
tion display settings, push the bottom
set button for two seconds.
To reset the average fuel consumption,
select it by pushing the bottom set but-
ton. The average fuel consumption dis-
play will flash for a few seconds. While
the display is flashing, push the top set
button for one second.
1
TIP
After resetting the average fuel con-
sumption, "_ _._" will be shown until the
vehicle has traveled 1 km (0.6 mi).
3-10
Instrument and control functions
Coolant temperature
1. Coolant temperature display
This display shows the coolant temper-
ature from 40 C to 116 C in 1 C incre-
ments.
If the message "HI" flashes, stop the
vehicle, then stop the engine and let it
cool. (See page 6-39.)
TIP

When the coolant temperature is
below 40 C, "Lo" will be displayed.

The coolant temperature varies
with changes in the weather and
engine load.
1
2
3
1
4
5
6
7
8
9
10
11
12