Output Services - Promax CompactMax-1 Manual

5.6.7

Output Services

This window gives information about services to be released on the RF output.
Select the RF output (RF 1 to RF 8) to work on.
Then expand the data tree to set the parameters in order to release services at
the output:
Network identifier: It is the number that identifies the network where
the signal is distributed.
Network name: It is the name that identifies the network where the
signal is distributed.
Transport stream identifier: It is a number that identifies a specific
transport stream.
Original network identifier: It is a number that identifies the network
from where the signal comes.
Private data specifier: Data that the receiver uses to properly identify
the LCN value.
Input: Select the SAT input (from 1 to 4) to select services.
Manual NIT version: Enter the version of the Network Information
Table. If this box is empty the NIT version will be automatically selected
by the modulator.
Generated services: It shows services generated from the selected
transport stream. User can select services by clicking on "Change
selection" button.
If the user wants to use the same network identifier, network original identifier,
network name, private data specifier or NIT version on all outputs, use the
external box and click on "Use for all outputs" box.
18
Figure 14.
June 2021