Table of Contents
Advertisement
5.6.6
Input Services
This window gives information about services captured from satellite receivers.
Select the same SAT inputs than selected in the "Receivers" tab.
Then expand the data tree to check information about the services captured.
Available information is:
Transport stream identifier: It is a number that identifies the transport
stream.
Original network identifier: It is a number that identifies the network
from where the signal comes.
Received services: It shows all services detected and its tables. Each
table shows all the metadata carried in the corresponding PSI/SI tables in
a tree diagram so user can deploy its content to the detail.
June 2021
Figure 13.
17
Advertisement
Table of Contents
