Table of Contents
Advertisement
• Recovering the default IP
If you do not remember or do not know the module IP follow the steps below:
Press the reset button of the IP address (see figure 2 – (5)).
The error LED will flash. Press and hold the button until the LED stops
blinking.
At this time the IP adress has changed to the default IP (192.168.29.30).
This change is temporary and if you turn the equipment off you will lose this
configuration. To save changes, connect the webserver application and click
on "Store fields" in the "Versions/Store" tab.
8
June 2021
Advertisement
Table of Contents
