Viewing The Face In The Dark; Useful Features; Time Adjustment - Casio 5624 Operation Manual

Power Saving
●
If the watch is not moved for about one hour,
the connection with your phone will be
terminated and the watch will enter Level 1
power saving.
Also, leaving the watch in a dark location for
about one hour between the hours of 9 p.m.
and 6 a.m. will cause the second hand to stop,
and the watch will enter Level 2 power saving.
If the watch is left in this condition for six or
seven days, all hands will stop and the watch
will enter Level 3 power saving.
Level 1 :
Except for communication with a phone,
watch functions are operational.
Level 2 :
Basic timekeeping functions are operational.
Level 3 :
Only the day indicator is operational.
Note
Note that the watch also may enter the
●
power saving state if its face is blocked
from light by your sleeve while you are
wearing it.
The watch will enter power saving
●
when it is in one of the modes below.
Calendar Mode
ー
Tide Graph Mode
ー
Stopwatch Mode (reset to all zeros)
ー
Recovering from Power Saving
●
Operation
Use one of the operations below to exit
●
power saving.
Press any button.
ー
Perform some crown operation.
ー
Angle the watch towards your face.
ー
To go from Level 2 or Level 3 power saving
●
to Level 1 power saving, place the watch in
a brightly lit location.
Operation Guide 5624

Viewing the Face in the Dark

The watch has an LED light that you can use
to illuminate the display for about three
seconds for viewing in the dark. When turned
on, illumination becomes gradually brighter
and then gradually dimmer.
Turning On Illumination
●
Press (A) to illuminate the face of the watch.
Face illumination is disabled in the
●
Stopwatch Mode.
Illumination is disabled while the hands are
●
moving at high speed.
The light may flicker when it turns on or off.
●

Useful Features

Pairing the watch with your phone makes a
number of the watch's features easier to use.
Auto time adjustment
Auto Time Adjustment
l
Diving Log data transfer to your phone
Viewing and Using Diving Log Data
l
Viewing of the tide level at a port you
specify with OCEANUS Connected
Specifying a Port
l
Selection of More Than 300 World Time
cities
Configuring World Time Settings
l
In addition, a number of other watch settings
can be configured using your phone.
To transfer data to a watch and to
configure settings, you first need to pair
the watch with your phone.
Getting Ready
l
Your phone needs to have the CASIO
●
"OCEANUS Connected" app installed to
pair with the watch.

Time Adjustment

Your watch can obtain date and time
information by connecting with a phone and by
receiving time signals, which it uses to adjust
its settings.
Important!
When you are on an aircraft or in any
●
other location where radio signals may
cause problems, enable the watch's
Airplane Mode to disable connection
with your phone.
Using the Watch in a Medical
l
Facility or Aircraft
6