Copyrights And Registered Copyrights; Troubleshooting - Casio 5624 Operation Manual

Stopping Radio Wave Emission by This
●
Watch
The watch emits radio waves while it is paired
with a phone.
When in a hospital, on an aircraft, or in any
other area where the use of radio waves is not
allowed, use the operation below to stop radio
wave generation.
Enable the watch's Airplane Mode
●
Using the Watch in a Medical Facility or
l
Aircraft
Copyrights and Registered
Copyrights
The Bluetooth ® word mark and logos are
●
registered trademarks owned by the
Bluetooth SIG, Inc. and any use of such
marks by CASIO Computer Co., Ltd. is
under license.
iPhone and App Store are trademarks of
●
Apple Inc. in the United States and other
countries.
iOS is a trademark or registered trademark
●
of Cisco Systems, Inc.
GALAXY is a registered trademark of
●
Samsung Electronics Co., Ltd.
Android and Google Play TM are trademarks
●
or registered trademarks of Google LLC.
Other company names and product names
●
used herein are trademarks or registered
trademarks of their respective companies.
Operation Guide 5624

Troubleshooting

Signal Reception (Time
Calibration Signal)
Q1
The watch cannot perform a receive
operation.
Is the watch's battery charged?
Signal reception is not possible while
battery power is low. Keep the watch
exposed to light until it recharges
sufficiently.
Solar Charging
l
Is the watch in the Calendar Mode?
The watch cannot receive time calibration
signals while the Airplane Mode is
enabled or while the watch is in a mode
other than the Calendar Mode. Return to
the Calendar Mode.
Navigating Between Modes
l
Using the Watch in a Medical Facility or
l
Aircraft
Is your time zone setting correct for your
location?
The watch will not indicate the correct time
if the time zone setting is wrong. Change
your time zone setting so it is correct for
your location.
Setting a Home City
l
Is the watch paired with a phone?
The time calibration signal auto receive
operation is not performed while the
watch is paired with a phone. (However,
time signal auto receive is performed if
there has been no time adjustment based
on connection between the watch and
phone for more than one day.)
Also, a manual time calibration signal
receive operation cannot be performed
while the watch is paired with a phone.
When you want to enable time calibration
signal reception without using a phone,
unpair the watch from your phone.
Unpairing
l
After checking the above, the watch still
cannot perform a receive operation.
Time calibration signal reception is not
possible under the conditions described
below.
While the watch is at Level 3 power
●
saving
When the crown is pulled out
●
If successful reception is not possible for
some reason, you can adjust the time and
day settings manually.
Q2
The signal receive operation always
fails.
Is the watch in a location that is appropriate
for signal reception?
Check your surroundings and move the
watch to a location where signal reception
is better.
Appropriate Signal Reception Location
l
Did you avoid touching the watch while the
receive operation was in progress?
Minimize movement of the watch and do
not perform any watch operation while a
receive operation is in progress.
Is the signal transmitter in your area
transmitting a signal?
The transmitter of the time calibration may
not be transmitting a signal.
Try again later.
Q3
Signal reception should have been
successful, but the watch's time and/
or day is wrong.
Is the indicated time off by one hour or by
30 minutes?
The watch may be using the wrong time
offset. Correctly specify the time zone
where you are using the watch.
Setting a Home City
l
Is the indicated hour and/or minute wrong?
The hour hand and/or minute hand may
be out of alignment. Perform the
procedure under "Adjusting Hand and
Day Indicator Alignment" to auto adjust
hour and minute hand alignment.
Adjusting Hand and Day Indicator
l
Alignment
Is the indicated day of the week wrong?
The day of the week hand (mode hand)
may be out of alignment. Perform the
procedure under "Adjusting Hand and
Day Indicator Alignment" to adjust mode
hand alignment.
Adjusting Hand and Day Indicator
l
Alignment
Is the World Time incorrect?
The World Time hands (small hour hand,
small minute hand) may be out of
alignment. Perform the procedure under
"Adjusting Hand and Day Indicator
Alignment" to adjust small hour hand and
small minute hand alignment.
Adjusting Hand and Day Indicator
l
Alignment
After checking the above, the time and/or
day settings is still wrong.
Adjust time and day settings manually.
Using Watch Operations to Adjust the
l
Time Setting
22