Viewing And Using Diving Log Data; Specifying A Port; Configuring World Time Settings - Casio 5624 Operation Manual

Note
If the watch does not indicate the
●
correct time even if it is able to connect
with a phone, adjust the hand and day
indicator positions.
Adjusting Hand and Day Indicator
l
Alignment
If there is a World Time City specified
●
with OCEANUS Connected, its time
will also be adjusted automatically.
Auto time adjustment is performed at
●
the times described below.
After your phone's time zone or
ー
summer time setting is changed
After 24 hours or more have passed
ー
since the last time adjustment using
Bluetooth connection
After 24 hours or more have passed
ー
since city swapping using
OCEANUS Connected or watch
operation
After 24 hours or more have passed
ー
since the last home city change or
time adjustment using watch
operation
Watch operation can be performed
●
even while it is connected with your
phone.
Triggering Immediate Time Adjustment
●
The watch's time setting will be adjusted
automatically whenever you establish a
connection between the watch and a phone.
Whenever you want to trigger immediate time
adjustment, perform the procedure below to
connect with a phone.
1.
Move the phone close to (within one meter
of) the watch.
2. X
Enter the Calendar Mode.
Navigating Between Modes
l
3. X
Hold down (B) for at least 0.5 seconds
until the second hand points to [C].
Release the button as soon as the second
hand points to [C].
When the watch connects with a phone,
the second hand will normally move to
[Y(YES)] and then the watch's time setting
will be adjusted.
Operation Guide 5624
Viewing and Using Diving
Log Data
You can use OCEANUS Connected to view
Diving Log data.
The items below can be viewed.
●
Dive start date and time
ー
Dive time
ー
Surface interval
ー
Location information
ー
Log data is displayed along with location
●
information about the site you dived. You
can also display images you pasted into the
log data. Diving log details can also be input
into log data, making it usable as a diving
log book.
Enter the Calendar Mode and then press
●
(B). Next, check to make sure that the
second hand is pointing to [Y(YES)].
If the second hand is not pointing to
●
[Y(YES)], refer to the information at the link
below.
Connecting with a Phone
l
1. Y
Tap the "OCEANUS Connected" icon.
2. Y
Perform the operation shown on the
phone screen to view Diving Log data.

Specifying a Port

After you use OCEANUS Connected to
specify a port, you can use the watch to view
the current time and tide level at the port.
Enter the Calendar Mode and then press
●
(B). Next, check to make sure that the
second hand is pointing to [Y(YES)].
If the second hand is not pointing to
●
[Y(YES)], refer to the information at the link
below.
Connecting with a Phone
l
Note
You can use OCEANUS Connected to
●
specify any one of 3,300 points around
the world as the port.
1. Y
Tap the "OCEANUS Connected" icon.
2. Y
Perform the operation shown on the
phone screen to specify a port.
Configuring World Time
Settings
Specifying a World Time City with OCEANUS
Connected causes the watch's World Time
City to change accordingly. The standard
time/summer time setting of the World Time
will be adjusted automatically without any
watch operation required by you.
Enter the Calendar Mode and then press
●
(B). Next, check to make sure that the
second hand is pointing to [Y(YES)].
If the second hand is not pointing to
●
[Y(YES)], refer to the information at the link
below.
Connecting with a Phone
l
Note
OCEANUS Connected World Time
●
lets you select from among
approximately 300 cities as the World
Time City.
Selecting a World Time City
●
1. Y
Tap the "OCEANUS Connected" icon.
2. Y
Perform the operation shown on the
phone screen. The World Time setting will
be reflected on the watch.
You can determine whether a World
●
Time is a.m. or p.m. by checking the
position of the small 24-hour hand.
World Time hour and minute
World Time hour (24-hour)
12