Sparkplugdismantlement - PIAGGIO Liberty 125 - 200 Euro 3 Manual

Sparkplugdismantlement (03_09, 03_10, 03_11)

<DIV class=cnt_summary title="Testo Breve (<4000 car.)">
In order to inspect the spark plug, follow the operation described when the engine is
cold:
1. Remove the spark plug inspection door «A» after unscrewing the corresponding
screws;
2. Detach the spark plug cap;
3. slide door «B» up on the engine cover;
03_09
4. Remove the spark plug with the spanner supplied (with fixing rubber).
To refit, repeat the procedure in reverse order using the spanner to insert the spark
plug or to tighten it in its seat. Care should be taken to installing and fixing it with correct
inclination
To refit the inspection door for the spark plug, follow the operations in reverse order,
making sure to insert the tooth in the central part of the cover.
WARNING
03_10
THE SPARK PLUG MUST BE REMOVED WHEN THE ENGINE IS COLD. THE USE
OF A SPARK PLUG WITH THERMAL GRADE OR THREAD OTHER THAN THE
INDICATED TYPE (SEE «DATA» SECTION) CAN SERIOUSLY DAMAGE THE EN-
GINE. REPLACE SPARK PLUGS AT THE INTERVALS INDICATED IN THE
SCHEDULED MAINTENANCE TABLE.
N.B.
USE OF SPARK PLUGS OTHER THAN THE INDICATED TYPE OR UNSHIELDED
SPARK PLUG CAPS CAN LEAD TO FAULTS IN THE VEHICLE 'S ELECTRICAL
SYSTEM.
Characteristic
03_11
Spark plug (125)
35