Advertisement
Quick Links
Sound activation
Night vision
The baby unit has infrared LEDs that
allow you to see your baby at night or
in a dark room. When the baby unit
detects low light levels, the infrared
LEDs turn on automatically.
When the infrared LEDs are on, the
NOTE
image is in black and white. This is
normal due to external light sources.
Depending on the surroundings and
TIP
other interfering factors, like
lightings, objects, colors and
backgrounds, the display resolution
may vary. Adjust the baby unit's
angle, or place the baby unit at a
higher level to prevent glare and
blurry display.
Go to www.vtechphones.com
to register your product for
enhanced warranty support and
latest VTech product news.
What's in the box
1 set for VM511/VM511-2
Quick start guide
1 set for VM501/VM511
2 sets for VM511-2
Specifications are subject to change without notice.
© 2015 VTech Communications, Inc.
All rights reserved. 07/15. VM511-X_VM501_QSG_ V1.0
Document order number: 96-010456-010-100
VM511
VM511-2
VM501
Advertisement
Related Manuals for VTech VM511
Summary of Contents for VTech VM511
- Page 1 Adjust the baby unit’s angle, or place the baby unit at a higher level to prevent glare and Specifications are subject to change without notice. blurry display. © 2015 VTech Communications, Inc. All rights reserved. 07/15. VM511-X_VM501_QSG_ V1.0 Document order number: 96-010456-010-100...
- Page 2 Install the battery, connect, and power on Place the baby monitor At least 1 meter (3 feet) THIS SIDE UP Mount the baby monitor Use a pencil to mark two holes in parallel. Make sure they are Adjust the baby unit angle. the same distance apart as the Check for reception strength and NOTE...