VTech VM5271-2 Quick Start Manual

Go to www.vtechphones.com VM5271-2
to register your product for
enhanced warranty support
and latest VTech product news.
Quick start guide
Connect and power on - Baby unit
CAUTION
• This baby monitoring system includes a special lens which is capable of optical zoom and requires
delicate treatment. Please avoid disassembling, dropping, or any other rough handling.
Change different views - View
Press VIEW to switch between the image of baby units and .
Press VIEW
What's in the box
Install the battery
>
1m (3ft)
Change different views - Patrol
Press PATROL to alternately view the image from baby units and every 10 seconds.
10s
VM5271-2 baby monitor system
Baby's room
Connect and power on - Parent unit
THIS SIDE UP
>
＞1m (3ft) 1m (3ft)
CAUTION
• The default volume of your parent unit
is level 4. If you experience high-pitched
screeching noise from your baby monitor
<
＜1m (3ft) 1m (3ft)
while positioning:
- Make sure your baby unit and parent unit
- Turn down the volume of your parent unit.
Change different views - Split
Press SPLIT to view the images from all baby units at once.
Status check
Once you power on your baby monitor, your parent unit displays image from baby unit
light turns on.
2s
The ON/OFF LED light of baby unit
are more than 1 meter (3 feet) apart, OR
Dim mode
With dim mode preset to on, your parent unit display will dim after 10 minutes of inactivity to conserve energy.
Living room
, and the LINK LED
turns on. As baby unit is not being viewed, its ON/OFF LED light flashes.
10 min inactivity
Press any buttons