PSC POWER STAR ELEMENT Operation Manual page 9

DC CONNECTIONS: There are seven (7) XLR female DC output connectors located on the front
panel of the PSC Power Star Element. The first six (6) XLRs located to left hand side of the unit
are rated for 3 Amps of output current. The remaining XLR output connector is rated for 5 Amps
of output current. Each connector is individually Poly Fuse protected.
Top panel with XLR Power Outputs, USB Power Outputs, SpeakOn Charger Connection, Power
Switch and Battery "Fuel Gauge"
POWER SWITCH: The main power switch is centrally mounted. It is a "Momentary" type of
toggle switch. You press and hold it momentarily upward to turn the unit "ON". You momentarily
hold it downward to turn the unit "OFF". Please note that the "OFF" direction of the switch is
equipped with a time delay circuit. You must press downward and hold this position for 4-5
seconds before the unit will shut off. This time delay function serves to keep you from
accidentally shutting down the PSC Power Star Element unexpectedly while working.
Power "ON" and "OFF" Switch. Note, to turn off unit you must hold switch in the "OFF"
position for 4-5 seconds