PSC POWER STAR ELEMENT Operation Manual page 12

OPTIONAL REMOTE BATTERY CABLE
Cable before attachment Cable attached to Power Star Element
EQUIPMENT POWER CABLES: PSC recommends that you use only two conductor, unshielded
16AWG power cable for power distribution. Shielded cable is not recommended as the shield
may cause short circuits between adjacent pins on the connectors. Please keep all cables as short
as possible as this will minimize DC voltage drop across the cable.
WARNING: It is highly recommended that you have your cables built by qualified personnel
and tested prior to use with your PowerStar Element. All power cables should be clearly
labeled on both ends as to what they are to be connected to. For example, label one end
"PowerStar Element" and the other end "XXX Mixer or Recorder". This will help prevent
inadvertently connecting the cables to the wrong piece of equipment. We cannot stress
enough the importance of good quality power cables and careful connections. Poorly
constructed and/or labeled cables can result in equipment damage!