PSC POWER STAR ELEMENT Operation Manual page 5

BATTERY RECOMMENDATIONS AVAILABLE ON AMAZON AS OF DATE OF MANUAL
PUBLICATION:
SEALED LEAD ACID (SLA):
Power Sonic #PS-12350814
Universal Power Group #D5722 UB12350 Post Terminal Style
Mighty Max Battery #ML35-12 SLA
Interstate Battery #SLA1155
MOUNTING THE POWERSTAR ELEMENT TO THE BATTERY:
IT IS EXTREMELY IMPORTANT THAT YOU READ AND THOROUGHLY UNDERSTAND THESE
ENTIRE MOUNTING INSTRUCTIONS BEFORE YOU MOUNT THE UNIT TO ANY BATTERY!
PLEASE NOTE THAT BATTERIES SOLD IN NORTH AMERICA TYPICALLY HAVE FLAT TERMINALS
THAT STICK UP OUT FROM THE BATTERY. BATTERIES SOLD IN MANY PARTS OF EUROPE AND
ASIA HAVE 6MM SCREW TERMINALS. EVERY POWERSTAR ELEMENT COMES WITH A PAIR OF
BRASS TERMINAL ADAPTERS. IF YOU HAVE A BATTERY WITH 6MM SCREW STYLE TERMINALS,
YOU SIMPLY INSTALL THE SUPPLIED BRASS TERMINAL ADAPTERS BEFORE INSTALLING THE
POWERSTAR ELEMENT ONTO THE BATTERY.
North American Terminal
1. MAKE SURE YOU HAVE A CORRECTLY SIZED BATTERY:
This device is designed to mount directly to the battery terminals of typical 33-35Ah
Sealed lead Acid (SLA) batteries and their equivalent LiFEPO4 batteries. It is
specifically designed to mount to batteries with terminals that have a 6.250"
Post Terminal Style
Post Terminal Style
Post Terminal Style
Brass Terminal Adapters 6MM Style Terminal